HB-37350-810-01-51F-EN SMX Installation manual.docx Page 185 of 234
Version: 50F
7.3 Reset-Function
The reset-function is divided into a startup-function after a power cycle (power off / on) and a
status-/alarm-reset = internal reset-function. The internal reset is called by pushing the “Reset”-
button on the SMX front panel or by a input port, configured as “Reset-Element” with active
“Alarmreset”. The table below show a overview of those reset-functions:
7.3.1 Type of Reset-Functions
To Next Page
Loading...