HB-37350-810-01-51F-EN SMX Installation manual.docx Page 213 of 234
Version: 50F
12.3.4 Software specification
The software specification refers to the previous specification of the safety functions. It can
also be replaced by a correspondingly worked out specification of the safety functions, as far
as this contains all specifications (see example under 12.3.3.3).
However, it is recommended to prepare an extracted list. This list should contain the following
data:
• Designation of safety function
• Description of function
• Parameters, as far as available
• Triggering event / operating status
• Response / output
The specification in detail should be suitable for later validation of the programming.
To Next Page
Loading...