BBH SMX 12-2 - Mechanical data

Installation manual
HB-37350-810-01-51F-EN SMX Installation manual.docx Page 41 of 234
Version: 50F
EMC
EN 61000-6-2, EN 61000-6-4, EN 61000-6-7, EN
61800-3, EN 61326-3, EN 62061
Operating altitude
2000m
Overvoltage category
III
Degree of pollution
2
Mechanical data
Dimensions (HxDxW [mm])
SMX31(/2) = 100x115x45
SMX31R(/2) = 100x115x90
SMX31R-4(2) = 100x115x67,5
Weight (g)
SMX31(/2) = 300
SMX31R(/2) = 680
SMX31R-4(/2) = 545
Mounting
To snap on top-hat rail
SMX31(/2)
2
SMX31R(/2)
4
SMX31R-4(/2)
3
Min. terminal cross-section / AWG
0,2 mm² / 24
Max. terminal cross-section / AWG
2,5 mm² / 12
(***) Derating, see Chapter „Derating outputs“
1)
Value applies only for extension module. For a total assessment in accordance with EN ISO 13849-1 one must
use a sries connection with the corresponding basic device
=> PFH
logic
= PFH
Basic
+ PFH
Extension