BBH SMX 12-2 - Technical characteristic data: Optional universal communication interface

Installation manual
HB-37350-810-01-51F-EN SMX Installation manual.docx Page 50 of 234
Version: 50F
Technical characteristic data: Optional universal communication interface
Safety related characteristic data
Pl acc. to EN ISO 13849-1
n.a.
PFH / architecture
n.a.
SIL acc. to IEC 61508
n.a.
Proof test interval
n.a.
General data
Decentralised communication interfaces
/D
2x RJ 45*
Field bus interfaces
/xN
2x RJ 45**
/xB
1x Sub-D***
MemoryCard (safety program)
/xxM
1x Mini SD (front side)
MemoryCard (License for safe field bus)
/xNx
/xBx
1x Mini SD (rear side)
SD bus
Phoenix plug
status LED’s
4
Field bus address rotary switch
/xBx
2
Electrical data
Power consumption (Logic)
3,5W
Environmental data
Temperature
0°C … +50°C operation
-25C° … +70C°storage and transport
Class of protection
IP 20
Climatic category
3k3 acc. to DIN 60 721-3
Min-, Maximum relative humidity (no
condensation)
5% - 85%
EMC
EN 61000-6-2, EN 61000-6-4, EN 61000-6-7, EN
61800-3, EN 61326-3, EN 62061
Operating altitude
2000m
Overvoltage category
III
Degree of pollution
2
Mechanical data
Dimensions (HxDxW [mm])
100x115x22,5
Weight (g)
110
Mounting
To snap on top-hat rail
Number of T-bus
1
Min. terminal cross-section / AWG
0,2 mm² / 24
Max. terminal cross-section / AWG
2,5 mm² / 12
(*) Optional for SDDC or SMMC
(**) Available field buses PROFINET (PROFISAFE), EtherCAT (FSoE), EtherNet/IP and Modbus/TCP
(***) Available field buses PROFIBUS (PROFISAFE)
For available fieldbuses see „HB-37450-810-01-xxF-DE COM Installation manual“