HB-37420-810-01-25F-EN SMX100 Installation manual.docx Page 258 of 260
Version: 25F
The following harmonized standards were applied:
• EN 61800-5-2:2007
Electrical power drive systems with adjustable number of revolutions -
Part 5-2: Requirement of security - functional security
• EN ISO 13849-1:2008 + AC:2009
Safety of machines, safety related parts of controls
Part 1: General design principles
• EN 62061:2005 + AC:2010 + A1:2013
Safety of machines –
Functional safety of safety related electric, electronic and programmable electronic
control systems
• EN 50178:1997
Equipment of high voltage systems with electronic operational means
• EN 60204-1/A1:2009 + AC:2010 (in part)
Safety of machines – Electrical equipment of machines -
Part 1: General requirements
• EN ISO 13850:2008
Safety of machines; EMERGENCY Stop, design principles
• EN 574:1996 + A1:2008
Safety of machines; two-hand controls, functional aspects, design principles
• EN 55 011:2009 + A1:2010
Industrial, scientific and medical equipment - radio interferences - limit values and
measuring methods
• IEC 61508 Part 1-7: 2010
Functional safety of electrical/electronic/programmable electronic safety-related
systems.
The safety, installation and operating instructions described in the product manual must be
followed.
Dipl.-Ing. (FH) Gerhard Bauer is responsible for the product manual.
Weiden, 26.07.2010 ...................................................
Gerhard Bauer
General Manager BBH Products GmbH
To Next Page
Loading...