BCP SKY5680 - Initial Setup and First Use; Separating Umbrella Ribs; Opening the Umbrella; Product Assembly Guide

2
Attach the part C base to the crossbars with four part 1 screws and four part 2 washers.
Partially screw in two part 3 knobs.
4 |
1
1. Hold the umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully
pull the ribs apart to free them.
2. Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together.
Insert the part B crossbar into the part A crossbar.
BEFORE FIRST USE
PRODUCT ASSEMBLY
A
B
C
1
2
x4
x2
x4
3