Need help?Do you have a question about the BD Alaris GW 800 Series and is the answer not in the manual?
General| Volume To Be Infused (VTBI) | 0.1 to 9999 ml |
|---|---|
| Type | Infusion Pump |
| Flow Rate Accuracy | ±5% |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Battery Type | Lithium Ion |
Details the function of buttons like ON/OFF, RUN/HOLD, CLEAR/MUTE, PRIME/BOLUS, etc.
Guidelines for using BD infusion sets, anti-siphon valves, and flow sensors.
Details explosion, fire, electrical shock, and ESD hazards.
Steps for checking Pump, items supplied, and charging.
Procedures for powering the Pump on and off.
Explains the automatic detection of compatible infusion sets.
Step-by-step guide to correctly load the infusion set.
Instructions for priming the infusion set before use.
Steps to start an infusion in standard mode.
Steps for starting infusion with VTBI and time settings.
Steps to start an infusion in micro mode.
Steps for starting infusion in micro mode with VTBI/time.
How to set up and run secondary infusions.
Adjusting infusion rate during an infusion.
How to administer a bolus dose.
Procedure for replacing the infusion set.
Procedure for replacing the fluid container.
Steps to clear air from the infusion line.
Adjusting the pressure limit for occlusion alarms.
Table of display messages, causes, and actions for all alarms.
Guidelines for pump maintenance and servicing.
List of alarm conditions and their causes.
Rate and bolus volume accuracy specifications.
Details on ultrasonic transducers for air detection.
How the pump monitors downstream pressure.
How the pump monitors upstream pressure.
To Next Page
