EasyManua.ls Logo

Be Cool eSC-Va1 - Battery Specifications; Usage

Be Cool eSC-Va1
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
S. 19
needed.
Use the charger and the charging port to connect the scooter to an outlet.
While the scooter is charging, the adapter’s indicator light will turn red.
If charging for the first time, charge the scooter for at least 4 hours before using it.
When the scooter is fully recharged, the adapter’s indicator light will turn green. You
may then disconnect the scooter from the charger.
DO NOT, under any circumstances, use the scooter while it is connected to the
charger.
Do not charge longer than necessary. Standard charging time is approx. 3
hours(4ah battery). 4.5hours(6ah battery), 5.5hours(7.5ah battery).
Charging longer than this may affect battery life and/or performance.
To maximize the battery life, charge it once every other month or every couple days
after riding.
5.2 Battery Specifications
Items Parameters
Type
Rechargeable Lithium-Ion
Charging Time
~4.5 hours
Voltage
36V
Capacity
6Ah
Weight
1.6kg
Dimensions
340*75*42 mm
Operating Temp.
-10°C to 40°C
Charging Temp.
5°C to 45°C
Storage Temp.
-20°C to 50°C
Watt Hours
216Wh
Management
Balance, Over-charge, Under-voltage, Overheating automatic
shutoff
6 USAGE
Read the following information before attempting to ride your e-Scooter.
A helmet as well as other protective gear must be worn at all times.
The e-Scooter supports up to 100 kg. Do not carry passengers.
Only operate the e-Scooter where permitted. Local laws may restrict where you may
ride.
The Scooter contains a motor and may be classified as a motor vehicle under local
laws in your area. It is your responsibility to abide by any local laws restricting how or
where you may ride.

Related product manuals