BeagleBoard BeagleY-AI - User Manual

7 pages

To Next Page

Getting started with your BeagleY-AI

To get started you need the following:

1. USB type A to type C cable

2. 5V ≥ 3A power adapter

3. Micro SD Card

4. Boot media

Boot Media

Download the boot media from the link below:

https://www.beagleboard.org/distros/beagley-ai-debian-xfce-12-5-2024-03-25

and flash it on a micro SD Card using https://etcher.balena.io/ following these steps:

1. Select downloaded boot media

2. Select SD Card

3. Flash!

Need help?

Do you have a question about the BeagleBoard BeagleY-AI and is the answer not in the manual?

BeagleBoard BeagleY-AI Specifications

General