Beamz LCB288 - Page 28

Sp1-10
Auto speed 1-10 (slow-fast)
St0-9
Strobe speed 0-9 (slow-fast)
6CH
A001-A507
Each channel mode is a separate address, pluged into the
console, automatically enter DMX mode
9CH
A001-A504
12CH
A001-A501
32CH
A001-A481
64CH
A001-A449
Sh1-12
Program show 1-12
Sp1-10
Program speed 1-10 (slow -fast)
St0-9
Program flash 0-9 (slow -fast)
Sou 1-4
Sound active modes 1-4, sound sensitivity 1-9
Sen 1-9
Slave
Slave( Slave, automatically identify the master)
R000-255
Red (0-100%) Red dimming
G000-255
Green (0-100%) Green dimming
B000-255
Blue (0-100%) Blue dimming
U000-255
White (0-100%) White dimming
St0-9
LED Strobe (slow-fast)
CL01-CL37
Static color
St0-9
LED strobe (slow-fast)
dis
10s
Blacklight shutoff time, from 10s to always on
20s
30s
60s
on
TenP
50-65 °C
Protecting temperature settings, protection within the range of
50-65°C, exceeding this range begins to reduce output power
dir
--->
Chasing direction: right
<---
Chasing direction: left
Send
yes
Send one-click settings, and the channel mode of all lamps is the
channel mode of the current master
ver
VVxx
Current software version
tenp
XXC
The current light plate temperature (degrees Celsius), if the
temperature detection line fails, the boot prompt-RT, the menu
displays ERROR