Need help?Do you have a question about the Beamz LED PARBAR 4Way Full Kit and is the answer not in the manual?
Prevent electrical shock or fire by avoiding rain, moisture, naked flames, and unplugging during storms.
Ensure adequate space for ventilation to prevent overheating and fire hazards.
Handle power cables by the plug, not the cable, and check for damage periodically.
Choose a location avoiding direct sunlight, vibration, excessive dust, and temperature extremes.
Unpack carefully and check for any transit damage before operating the unit.
Outputs built-in programs synchronized with music via the onboard microphone.
Outputs built-in programs at a set speed or delay, controlled by the onboard controller.
Allows manual control over color mixing, strobing, and fading effects.
Control individual LED color, brightness, strobe, and chase via external DMX controller.
Offers 3 sound patterns or 3-channel DMX for RGB control.
Link multiple units to one master unit to create synchronized chain effects.
Explains the internal control system, interface, and navigation buttons.
Details the functions of the BLACKOUT, HOLD, SOUNDON, and PRESET pedals.
Provides a table detailing DMX channels, values, and functions for control.
Describes operation without DMX controller or footswitch (sound, auto, manual).
Explains how to link multiple units and set master/slave configurations.
Outlines the terms and conditions for product warranty coverage.
Instructions for environmentally responsible disposal of electrical products.
Prevent electrical shock or fire by avoiding rain, moisture, naked flames, and unplugging during storms.
Ensure adequate space for ventilation to prevent overheating and fire hazards.
Handle power cables by the plug, not the cable, and check for damage periodically.
Choose a location avoiding direct sunlight, vibration, excessive dust, and temperature extremes.
Unpack carefully and check for any transit damage before operating the unit.
Outputs built-in programs synchronized with music via the onboard microphone.
Outputs built-in programs at a set speed or delay, controlled by the onboard controller.
Allows manual control over color mixing, strobing, and fading effects.
Control individual LED color, brightness, strobe, and chase via external DMX controller.
Offers 3 sound patterns or 3-channel DMX for RGB control.
Link multiple units to one master unit to create synchronized chain effects.
Explains the internal control system, interface, and navigation buttons.
Details the functions of the BLACKOUT, HOLD, SOUNDON, and PRESET pedals.
Provides a table detailing DMX channels, values, and functions for control.
Describes operation without DMX controller or footswitch (sound, auto, manual).
Explains how to link multiple units and set master/slave configurations.
Outlines the terms and conditions for product warranty coverage.
Instructions for environmentally responsible disposal of electrical products.
General| Type | LED PAR Bar |
|---|---|
| Voltage | 100-240V |
| Weight | 3.5kg |
| Beam Angle | 25° |
| Housing Material | Metal |
| Protection Class | IP20 |
| LED Colours | RGB |
| Control Modes | DMX, Auto, Sound Active, Master/Slave |
| Power Supply | AC 100-240V, 50/60Hz |
| DMX Channels | 3, 6 |
To Next Page
