EasyManua.ls Logo

Bear DFH-B10G1 - Vacuum Airbag Status; Normal State Indicator; Vacuum State Indicator; Vacuum Lunch Box Opening

Bear DFH-B10G1
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
盒盖时检查胶单阀,证单与盖子装配到位。
When covering the lunch box cover, check the middle silicone check valve to ensure that the
check valve and the cover are assembled in place.
真空气囊状态指示
Vacuum Airbag Status Indication
正常状,保塞上凸 真空状,保塞下
Normal state, fuse plug up Vacuum state, fuse plug down
3. 真空盒打方法
4. Opening method of vacuum lunch box:
取出中胶单排气才可打上盖盖后将装回上盖上,避免失方便下次
使用。
Take out the middle silica gel one-way valve to exhaust before opening the upper cover. After
opening the cover, install the one-way valve back on the upper cover to avoid inconvenience for
next use.
加水量及时间参照表(仅提供参考,您可根据使用经验加以调整)
Water addition and time reference table (for reference only, you can adjust it according to
your experience)

Other manuals for Bear DFH-B10G1