BEARWARE 304580 - Switching On and Off Manually

18 English
Then press the "V+" buon again. You can then set the next program me at
which the connected device has to be switched o (OFF).
Congure the me and days of the week as described in the previous step.
Note: Please remember that the days of the week for switching on and switching
o have to be congured separately. The selected combinaon is not automacal-
ly adopted for the enre mer programme.
You can choose between all 20 (1-20) programs and program them as desired
using the "V+" and "V-" buons.
A total of 20 mer programs are available, which you can congure in this
way. Once all the programs have been customised as needed, please press the
"CLOCK" buon to return back to the me display. The display again shows the
current me and the day of the week. The mer is ready to use.
Note: Please ensure that the mes of the individual mer programmes do not over-
lap in order to avoid unintenonal switching on or o.
To disable a switching program again or to re-enable a disabled program, navigate
to the desired program and press the "ON/OFF" buon.
9. Switching on and o manually
You can manually switch on and switch o the device connected to the mer
using the "ON/OFF" buon with hand symbol or re-enable the automac control
according to the congured mer programs.