Need help?Do you have a question about the Beat Junior and is the answer not in the manual?
Secure bass drum heads and hoops evenly to the drum shell.
Install and tighten bass drum tension rods using the drum key.
Attach bass drum spurs to the drum shell using the T-handle.
Insert and tighten the bass drum beater into the pedal.
Mount the bass drum pedal to the drum rim, ensuring alignment.
Assemble the floor tom using heads, rims, and legs.
Insert and tighten tom arms/holders into the bass drum casting.
Mount toms into arms and tighten using T-handles.
Adjust tom height according to player size.
Attach horizontal arms to the snare support rod.
Adjust the angle of the snare stand arms.
Place the snare drum uniformly on the stand arms.
Fold legs, insert upper pull rod, and tighten.
Mount Hi-Hat cymbals using felt washers and a stop nut.
Place the lower Hi-Hat plate on the upper support.
Insert the plate holder onto the bass drum.
Attach cymbal support, place felts, and secure cymbal.
To Next Page
General