EasyManua.ls Logo

Beats Pill - Advanced Features and Controls; Line Out, Volume, and Bluetooth Controls; Charging and Battery Status

Beats Pill
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
5. LINE OUT
Audio output of the Pill™ can be used to connect to an alternate audio system,
such as a home theater system, or a Beats by Dr. Dre Beatbox®, by plugging the
audio cable into the “OUT” jack on the Pill™ to the “line in” of the audio playback
device of your choice.
6. VOLUME
To adjust volume of the Pill, use the volume up “+” and volume down “-” buttons
on the top surface of the Pill. When the “OUT” jack on the Pill™ is being used, the
volume buttons are disabled.
7. BLUETOOTH® CONTROLS
Audio play and pause: To pause and resume playback when connected through
Bluetooth®, press the “b” button.
Phone Calls: Pill™ can be used to make and receive phone calls when connected
through Bluetooth® (audio playback will be paused during calls). Answer/End
Call: Press the “b” button While on a Call: Short press to answer incoming call.
Long press to ignore incoming call. Short press to switch between calls. Switch from
Pill™ to Phone: Double press the “b
8. CHARGING AND BATTERY
To obtain optimum power capacity, the Pill™ should be charged using the
provided USB cable along with the Power Supply Unit (PSU) in your packaging box.
To charge the Pill, plug the USB cable from the PSU to the USB port on the back
of the Pill. While charging, the USB port will glow solid RED. When the Pill™ is fully
charged, the USB port will glow solid GREEN. When the Pill™ is at 20% battery life,
the USB port will blink RED. Battery life is approx. 7 hrs at moderate listening levels.
UK English

Other manuals for Beats Pill

Related product manuals