Bebe Care Cloud 091600 - ASSEMBLY; OPERATING INSTRUCTIONS; Assembling Cot Bed Rail

11
ASSEMBLY / OPERATING INSTRUCTIONS
1
Carefully lay the cot down on one Side Panel.
Remove 8 x 35mm bolts connecting the Leg
Assembly to the Side Panels.
Remove 4 x 60mm bolts from the ends of the
Side Panel.
1a.
1b.
1c.
To assemble Cot Bed Rail...
2
3
4
Carefully remove the Side Panel from the Cot.
Replace the Side Panel with the Cot Bed Rail.
Secure the Cot Bed Rail to the Cot End Panels
using 4 x 60mm bolts.
Secure the Cot Bed Rail to the Leg Assembly
using 8 x 35mm bolts.
Stand the Cot upright.
2a.
3a.
3b.
3c.
4a.
The cot is now ready for use in Cot Bed Mode.
NOTE: Cot Bed Rail can only be used when Mattress Base is in
Low Base Mode