EasyManua.ls Logo

Bebe Care SERENE 037730 - User Manual

Default Icon
14 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
SERENE
SWING
MODEL # 037730
Question and Answer IconNeed help?

Do you have a question about the Bebe Care SERENE 037730 and is the answer not in the manual?

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
    1. Assembly
    2. Operation
    3. Bluetooth Usage
    4. Harness Usage
    5. Adjusting Shoulder Harness Height
    6. Adjusting Seat Position
    7. Removing Seat Insert
    8. Removing Seat Liner from Frame
    9. Removing Seat from Frame
  4. Maintenance Features
    1. Cleaning
    2. General Maintenance
    3. Customer Support
  5. Safety Precautions

This document is a user manual for the Bebecare Serene Swing, model #037730. It provides instructions for assembly, operation, and maintenance of the swing, along with important safety precautions.

Function Description

The Bebecare Serene Swing is designed to provide a safe and comfortable environment for infants from birth up to 9 kg. It features a gentle swinging motion, built-in music, and Bluetooth connectivity for playing custom audio. The swing is not intended for prolonged periods of sleeping and should not replace a cot or bed for a child needing to sleep.

Important Technical Specifications

  • Age Range Suitability: Birth to 9 kg.
  • Power Supply: The swing operates with a transformer providing 5V / 2A.
  • Bluetooth: Connects to devices via "AC-46" for audio playback.
  • Timer Settings: 10, 15, and 30 minutes. The swing automatically turns off after 90 minutes for power saving.

Usage Features

Assembly

  1. Swing Frame Assembly:

    • Insert the top end of the Seat Sliding Tube (with two underside push pins) into the housing at the top of the Seat Frame until secure.
    • Insert the bottom end of the Seat Sliding Tube into the housing at the bottom of the Seat Frame until secure.
    • Align the Rotating Base semi-circle with the motor pin inside the Swing Base.
    • Insert the Seat Assembly into the Swing Base until secure.
    • The Seat Frame can be locked in a stationary position by sliding the lever at the front down, or released by sliding it up.

  2. Toy Bar Assembly:

    • Align the bottom of the Toy Bar with the housing on top of the Seat.
    • Insert the Toy Bar until secure.
    • To remove, press the tab at the back of the Toy Bar while pulling it up and away from the Seat Frame.

  3. Powering the Swing:

    • Plug the USB power lead into the front right-hand side of the Swing Base.
    • Plug the other end of the USB power lead into a suitable power adaptor/transformer and then into a power supply.

Operation

  • Power Button: Press to turn the swing on/off.
  • Swing Speed Down Button: Press to reduce swing speed.
  • Swing Speed Up Button: Press to increase swing speed.
  • Timer Button:
    • One press sets the timer for 10 minutes.
    • Two presses set the timer for 15 minutes.
    • Three presses set the timer for 30 minutes.
    • The swing will automatically turn off after 90 minutes for power saving.
  • Music Button:
    • Press once to begin playing built-in music.
    • Press a second time to stop playing music.
    • Press a third time to change to the next song.
  • Volume Up: When music is playing, hold the 'Swing Speed Up' button to increase volume.
  • Volume Down: When music is playing, hold the 'Swing Speed Down' button to decrease volume.

Bluetooth Usage

  1. Turn on Bluetooth on your chosen device.
  2. Hold down the 'Music' Button on the Swing Base to enter Bluetooth mode.
  3. Connect to "AC-46".
  4. Play music from your device through the swing speakers.
  5. Volume control and song selection are managed through your device.
    • Note: To return to playing the swing's built-in music, disconnect the Bluetooth device.

Harness Usage

  1. Place the child into the swing.
  2. Place the crotch pad up and between the child's legs.
  3. Secure the left and right shoulder clips into the waist straps.
  4. Insert the combined shoulder and waist strap clips into the harness buckle.
  5. Secure the crotch pad flap down and over the harness buckle.
  6. Tighten the adjusters on the waist and shoulder straps to ensure the harness is secure.
  7. To release the harness buckle, push the buckle release button.
    • Note: Always adjust the harness when changing the child's seating position.

Adjusting Shoulder Harness Height

  1. Release the harness buckle and separate the shoulder straps from the waist straps.
  2. Feed the shoulder straps back through the Seat Insert and Seat Liner.
  3. Re-insert the shoulder straps through the higher harness adjustment height in the Seat Liner and the Seat Insert.

Adjusting Seat Position

  1. Rotate the Seat Adjuster to the 'unlocked' position.
  2. While holding the Seat Adjuster in the 'unlocked' position, slide the Seat assembly up or down to the desired position.
  3. Rotate the Seat Adjuster to the 'locked' position to secure it.

Removing Seat Insert

  1. Release the waist and shoulder straps from the harness buckle.
  2. Feed the crotch strap, waist straps, and shoulder straps back through the Seat Insert and remove the Seat Insert away from the seat.

Removing Seat Liner from Frame

  1. Locate the Seat Liner zipper on the right-hand side of the Seat.
  2. Unzip the Seat Liner and remove it from the Frame.
  3. To re-install, align the Seat Liner zipper with the Frame zipper.
  4. Completely re-zip to secure.

Removing Seat from Frame

  1. Locate the seat release tab where the Seat meets the Frame.
  2. Pull and hold the seat release tab while simultaneously pulling the Seat up and away from the Frame.

Maintenance Features

Cleaning

  • Frame: Use a damp cloth to clean the frame. Do not use abrasive cleaners. Allow it to dry completely before storing.
  • Fabrics/Trims: Do not dry clean, use bleach, machine wash, tumble dry, or spin dry.
  • Seat Liner and Seat Insert: Hand wash separately if required.

General Maintenance

  • Regularly check the swing to ensure locking devices and components are secure and working properly.
  • Always check screws, nuts, and other fasteners for tightness; tighten or replace if required.
  • For safety, seek prompt repairs for bent, torn, worn, or broken parts.
  • Only use parts and accessories approved by CNP Brands.

Customer Support

  • Australia: Contact CNP Brands on 1300 667 137.
  • New Zealand: Contact Wainhouse Distribution on 0800 567 5000.
  • Warranty: For terms and conditions, visit cnpbrands.com.au.

Safety Precautions

  • Read all instructions before assembly and use. Retain instructions for future reference.
  • Never leave the child unattended.
  • Never use the product on an elevated surface (e.g., a table).
  • The swing is not intended for prolonged periods of sleeping.
  • Always use the restraint system.
  • Discontinue use once the child can sit unaided, attempts to climb out, or can roll over.
  • Do not let children play with the product.
  • Do not move or lift the product with the baby inside it.
  • Do not use if any components are broken or missing.
  • Transformers must be regularly examined for damage to the cord, plug, enclosure, and other parts. Do not use if damaged.
  • The swing must only be used with a 5V / 2A transformer.
  • Ensure all locking equipment is installed well before use.
  • Do not use the swing on any rough surface.
  • Never use the toy-bar to carry the swing.
  • This swing does not replace a cot or a bed. If your child needs to sleep, place them in a suitable cot or bed.
  • Only use accessories or replacement parts approved by the manufacturer.

Bebe Care SERENE 037730 Specifications

General IconGeneral
BrandBebe Care
ModelSERENE 037730
CategoryBaby Swing
LanguageEnglish