11
EN
Split Air Conditioner | Aire Acondicionado Split | Ar Condicionado Split
• Use a power supply circuit and circuit breaker certied in accordance
to local safety regulations.
• Install a circuit breaker to avoid malfunctions.
• An all pole disconnection switch with a contact separation of at least 3
mm across poles should be permanently connected.
• This includes a circuit breaker with suitable capacity. The air switch
should include a magnet buckle and heating buckle function to
protect against short-circuits and overloads.
• The air conditioner should be properly grounded. Incorrect grounding
may cause an electric shock.
• Use a certied power cord.
• Make sure the power supply matches the requirements of the air
conditioner. Please install the appropriate power supply cables before
using the air conditioner.
• Properly connect the live , neutral and grounding wires in the socket.
• Be sure to cut o the power supply before proceeding with any
electrical or safety work.
• Do not connect the power before nishing installation.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in order
to avoid a hazard.
• The refrigerant circuit will be very hot, so the interconnection cable
must be kept away from the copper tube.
• The appliance must be installed in accordance with national wiring
regulations.
• Installation must be performed in accordance with the standard
requirements.
• The air conditioner is a class 1 electric appliance. It must be properly
grounded with a specialized grounding device by a professional.
Please make sure the appliance is always eectively grounded, to
avoid the risk of electric shock.
• The yellow-green wire in the air conditioner is the grounding wire,
which can’t be used for other purposes.
To Next Page
Loading...