19
EN
Split Air Conditioner | Aire Acondicionado Split | Ar Condicionado Split
• The unit must not be installed in a location where there may be
Gas leaks next to the unit
may cause an explosion and other accidents.
• Do not use extension cords for electrical connections. If the electric
wire is not long enough, please contact your local authorised
service centre and ask for an appropriate electric wire. Poor
connections may lead to electric shock or re.
•
indoor and outdoor units. Firmly clamp the wires so that their
terminals receive no external stresses. Electric wires with insuicient
capacity, improper wire connections and insecure wire terminals may
cause an electric shock or a re.
Installation tools
NOTE:
• Please contact your local agent for installation.
• Don’t use an uncertied power cord.
Selecting the installation spot
Install the units in the following places may cause malfunction. If such is
unavoidable, please consult the local dealer:
1. Locations with strong heat sources, vapours, ammable or explosive
gas, or airborne volatile objects.
1 Level 2 Screw driver 3 Impact drill
4 Drill head 5 Pipe expander 6 Torque wrench
7 Open-end wrench 8 Pipe cutter 9 Leak detector
10 Vacuum pump 11 Pressure meter 12 Universal meter
13 Hexagonal spanner 14 Measuring tape
To Next Page
Loading...