23
EN
Dehumidier | Deshumidicador | Desumidicador
If a vacuum is not possible, make a manifold so that refrigerant can
be removed from various parts of the system.
Make sure that cylinder is situated on the scales before recovery
takes place.
Start the recovery machine and operate in accordance with
manufacturer’s instructions.
Do not overll the cylinders (no more than 80 % of the volume
liquid charge).
Do not exceed the maximum working pressure of the cylinder, even
temporarily.
When the cylinders have been lled correctly and the process
completed, make sure the cylinders and the equipment are removed
from the site promptly and all isolation valves on the equipment are
closed o.
Recovered refrigerant shall not be charged into another refrigeration
system unless it has been cleaned and checked.
Equipment shall be labelled stating that it has been de-commissioned
and emptied of refrigerant. The label shall be dated and signed. Ensure
that there are labels on the equipment stating the equipment contains
ammable refrigerant.
16. Recovery
• When removing refrigerant from a system, either for service
or decommissioning, it is recommended good practice that all
refrigerants be removed safely.
To Next Page