EasyManua.ls Logo

Becken BDH4758 - Page 29

Becken BDH4758
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
EN
Dehumidier | Deshumidicador | Desumidicador
AUTO START feature.
• Press or hold the UP or DOWN buttons to change the Auto time by
0.5 hour increments, up to 10 hours, then by 1 hour increments up
to 24 hours. The control will count down the time remaining until it
starts operation.
• The selected time will register in 5 seconds and the system will
automatically revert to display the previous humidity setting.
• Turning the unit ON or OFF at any time or adjusting the timer
setting to 0.0 will cancel the Auto Start or Auto Stop feature.
• When the LED display window displays the “P2” code, the Auto Start
or Auto Stop feature will also be cancelled.

The unit can run on the MAX dehumidication function when it is
under the Dryer mode. The fan speed is xed at high fan speed.
Wet clothes
airow
Allow a 30-50 cm distance
between the top and right side
of the unit in relation to wet
clothes.
Fig. A