EasyManua.ls Logo

Becken BDH4758 - Page 32

Becken BDH4758
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
This unit is designed to operate with a working environment
between 5º C / 41º F and 32º C / 90º F, and between 30 % (RH) and
80 % (RH).
If the unit has been switched o and needs to be switched on again
quickly, allow approximately three minutes for the correct operation
to resume.
Do not connect the dehumidier to a multiple socket outlet, which is
also being used for other electrical appliances.
Select a suitable location, making sure you have easy access to an
electrical outlet.
Plug the unit into an electrical socket-outlet with earth connection.
Make sure the water collector is correctly tted otherwise the unit
will not operate properly.
NOTE: When the water in the collector reaches to a certain level,
please be careful when moving the unit to avoid it spilling over.