Becken BDH4758 - Page 38

38
2.4. Troubleshooting

Problem What to check
The unit does not
start
• Make sure the dehumidier’s plug is
pushed completely into the outlet.
• Check the house fuse/circuit breaker box.
• The dehumidier has reached its pre-set
level or the water collector is full.
• The water collector is not in the proper
position.

does not dry the air
as it should
• Did not allow enough time to remove the
moisture.
• Make sure there are no curtains, blinds or
furniture blocking the front or back of the
dehumidier.
• The humidity selector may not be set low
enough.
• Check that all doors, windows and other
openings are securely closed.
• Room temperature is too low, below 5º C
(41º F).
• There is a kerosene heater or something
giving o water vapor in the room.
The unit makes a
loud noise when
operating
• The air lter is clogged.
• The unit is tilted instead of upright as it
should be.
• The oor surface is not level.
Frost appears on the
coils
• This is normal. The unit has an Auto defrost
feature.