12
pot. This is normal.
then wipe the spots away with a brush.
heating. After the beep for 1 minute, it will automatically go into
standby mode.
2.3. Maintenance
Cleaning and maintenance
the power plug from the power socket. Wait until the heating plate
on the induction cooker is cold before cleaning.
• After prolonged use, the air inlet/outlet openings will accumulate
dust and other forms of dirt. Please clean them using a soft brush or
brush).
NOTE: Please do not rinse it with water.
• For oil spots on the induction plate, use a soft moist cloth with a little
tooth paste or mild detergent. And then use a soft moist cloth to
wipe it until no stain remains.
• When not in use for an extended period, please disconnect the
power plug from the power outlet and protect the induction cooker
from any dust or bugs (e.g. by placing it in a sealed plastic bag).
To Next Page
