10
Ironing
1. Place the steam generator on a stable and even surface.
2. Make sure that there is enough water in the water tank (see section
‘Filling the detachable water tank’).
3. Insert the mains plug in an earthed wall socket and press the on/o
button to switch the steam generator on. The ‘iron ready’ light starts
flashing to indicate that the steam generator is heating up (this takes
approx. 2 minutes).
When the ‘iron ready’ light stays lit, the steam generator is ready for use.
* The blue light refers to level 1; press the T-Switch button to get the
green light for level 2.
4. Specific types only: Press the carry lock release button to unlock the
iron from the iron platform.
AF Manual ferro caldeira BSS4426 A5.indd 10AF Manual ferro caldeira BSS4426 A5.indd 10 20/03/2020 11:2120/03/2020 11:21
To Next Page