9
EN
Table Blender | Batidora de Vaso | Liquidicadora
INSTRUCTIONS FOR USE
• Insert the jar onto the motor unit and make sure the
jar is well placed down.
• Wash fruit/vegetables rst and slice them into small
pieces – about 2 cm.
• Place the sliced fruit/vegetables into the jar.
• Before blending, add the desired amount of water or liquid mixture into
the jar. Make sure the preparation does not ll the jar over the highest
standard line. You can see the highest standard line marked on the jar.
• Fit the lid into the jar rmly.
• Plug the appliance in and then turn the speed button to position 1, 2,
3 or 4. For ice, we suggest using the Pulse speed.
• Do not keep the blender in operation for more than 2 min. If the case motor
overheats, cool down the blender for 20 min. before the next operation.
• After blending, turn the speed button to 0 position. Wait for the
motor unit to stop and the remove the jar.
2.3. Maintenance
• Before cleaning it, remove the power cord from the socket.
• Never immerse the housing with motor in water!
• Do not use any sharp or abrasive detergents.
• Only a damp rinsing cloth should be used to clean the outside of the
housing.
• Components that have come into contact with food can be cleaned
in soapy water.
AF BECKEN MANUAL Liquificador_1000W BTB5027 SKU7178866.indd 9AF BECKEN MANUAL Liquificador_1000W BTB5027 SKU7178866.indd 9 06/07/2020 16:4006/07/2020 16:40
To Next Page
Loading...