Becken Flex BIH3302 - Page 33

33
EN
Becken Flex Induction Hob | Placa de Inducción Becken Flex | Placa de Indução Becken Flex
The touch controls
are unresponsive.
The controls are
locked.
Unlock the controls.
See section ‘Using
your induction
cooktop’ for
instructions.
The touch controls
are diicult to
operate.
There may be a slight
lm of water over
the controls or you
may be using the tip
of your nger when
touching the controls.
Make sure the touch
control area is dry
and use the ball of
your nger when
touching the controls.
The glass is being
scratched.
Rough-edged
cookware.
Unsuitable, abrasive
scourer or cleaning
products are being
used.
Use cookware with
at and smooth
bases. See ‘Choosing
the right cookware’.
See ‘Care and
cleaning’.
Some pans make
crackling or clicking
noises.
This may be caused
by the construction of
your cookware (layers
of dierent metals
vibrating dierently).
This is normal for
cookware and does
not indicate a fault.
The induction
hob makes a low
humming noise when
used on a high heat
setting.
This is caused by
the technology of
induction cooking.
This is normal, but
the noise should
quieten down or
disappear completely
when you decrease
the heat setting.
Becken_Placa de Indução_BIH3302_Manual_v3.indd 33 06/04/2018 10:13