Subject to correction and technical modifications 26 Copyright by Becker GmbH, D-76303 Karlsbad
,QVWDOODWLRQJXLGH
G Note the safety instructions of the vehicle manufacturer (airbags, immobilisers etc.).
• When routing the cables, ensure that they cannot become jammed, kinked or ripped out.
• Before installation, park the vehicle in a safe and level place and remove the ignition key.
• If using branch connections, it is important to note the relevant cable section.
&RQQHFWLRQGLDJUDPIRUWKHQDYLJDWLRQV\VWHP
Note: The various connection options are described in detail on page 47.
Radio aerial
Speedometer / speedometer cable signal
GPS antenna
Power supply
Reverse signal
'70
Sound system /
loudspeaker
To Next Page
Loading...
