Operating/Configuration
CX50x0 47Version: 1.9
• CDROM (CD drive)
• ZIP100 (Zip-Drive)
• USB-FDD (USB-Floppy)
• USB-ZIP (USB Zip-Drive)
• USB-CDROM (USB CDROM)
• Legacy LAN (network)
• WIN CE
• Disabled (deactivated)
Second Boot Device
This setting is used for booting, if the first boot device is not available. First set the drive to be used as boot
drive. Options:
• S120 (LS-Drive)
• Hard Disk
• CDROM (CD drive)
• ZIP100 (Zip-Drive)
• USB-FDD (USB-Floppy)
• USB-ZIP (USB Zip-Drive)
• USB-CDROM (USB CDROM)
• Legacy LAN (network)
• WIN CE
• Disabled (deactivated)
Second Boot Device
This setting is used for booting, if the first and second boot device are not available. First set the drive to be
used as boot drive. Options:
• S120 (LS-Drive)
• Hard Disk
• CDROM (CD drive)
• ZIP100 (Zip-Drive)
• USB-FDD (USB-Floppy)
• USB-ZIP (USB Zip-Drive)
• USB-CDROM (USB CDROM)
• Legacy LAN (network)
• WIN CE
• Disabled (deactivated)
Boot Other Device
This option offers two choices: Enabled or Disabled. The standard setting is Enabled. The Enabled setting
enables the BIOS to try all three types, i.e. "First Boot Device", "Second Boot Device" or "Third Boot Device".
Boot Up NumLock Status
State of the numeric keypad. With On it is activated, with Off not.
To Next Page
Loading...