Need help?Do you have a question about the Beckman Coulter Biomek 4000 and is the answer not in the manual?
General| Category | Automated Liquid Handler |
|---|---|
| Pipetting Technology | Air displacement |
| Type | Automated workstation |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Operating System | Windows-based software |
| Number of Channels | 8 |
| Throughput | Variable, depends on application and protocol |
| Volume Range | 0.5 µL to 1000 µL |
| Precision | ≤5% CV at 1 µL |
Covers overview of safety procedures and alerts for warnings, cautions, and notes.
Details specific safety measures and warnings related to the instrument's operation.
Addresses safety precautions for electrical hazards and handling chemicals.
Provides warnings and precautions regarding the instrument's moving components.
Explains symbols indicating regulatory compliance such as CE and RCM marks.
General description of the Biomek 4000 Laboratory Automation Workstation.
Details on the workstation's hardware and the control software.
Lists other relevant manuals for software and accessories.
High-level overview of the workstation's main components.
Covers initial setup steps and site requirements for relocation.
Details technical specifications for the workstation environment and power.
Procedures for relocating the instrument and connecting it.
Instructions for adding optional side modules to the workstation.
Routine care procedures and guidance for resolving common issues.
Describes the workstation's deck and various positioners for labware.
Details on installing and using standard labware and tip rack holders.
Instructions for installing and using tool racks and collar holders.
Introduction to the different single-channel and multi-channel pipetting tools.
Procedures for placing pipette tools onto tool racks.
Information on compatible tips and labware for pipetting tools.
Guidance on cleaning, storing, and resolving issues with pipetting tools.
Description of the gripper tool's function and capabilities.
Steps for installing the gripper tool and replacing finger pads.
Guidance for resolving common problems with the gripper tool.
Introduction to the Hardware Setup interface and how to access it.
Procedures for configuring the workstation, tools, and external devices.
Instructions for calibrating axes and managing configuration settings.
Concept of framing and manual procedures for deck positions.
Steps for framing microplate wells and the gripper tool.
Procedure for calibrating the gripper tool's sensor.
Introduction to manual control and how to access it.
Procedures for homing, moving, and stopping the pod.
Introduction to advanced manual control features.
Detailed operations for advanced manual control of the pod.
Definitions of key terms used in the manual.
Alphabetical list of abbreviations used in the document.
To Next Page
