Beckman Coulter Biomek NXP User Manual

987892AF
xii
Safety Notice
Warnings and Cautions Found in this Manual
WARNING
Avoid direct exposure to the laser beam. Never look directly into the laser beam,
and never leave the laser on, open, or unattended.
WARNING
Always have the laser module access cover, located on the bar code reader, in
place when operating or troubleshooting the laser module.
CAUTION
If a label is applied by any means other than the Beckman Coulter Print and Apply
device, an increase in bad reads or no reads may occur.
CAUTION
To prevent damage to the shuttle, first place the AccuFrame into the Framing Tool
Adaptor. Then place the AccuFrame with the attached adaptor on the shuttle.
CAUTION
Risk of contamination. Selecting Unload Tips will cause the disposable tips to be
shucked from the tip mandrels at the current pod position. The pod will not move
to a disposal ALP location prior to unloading the tips. Ensure the pod is positioned
above a Disposal ALP before selecting Unload Tips.

Beckman Coulter Biomek NXP Specifications

General

Brand	Beckman Coulter
Model	Biomek NXP
Category	Laboratory Equipment
Language	English