Need help?Do you have a question about the Beckman Coulter SW 41 Ti and is the answer not in the manual?
General| Rotor Type | Swinging Bucket |
|---|---|
| Maximum Speed | 41, 000 rpm |
| Number of Tubes | 6 |
| Rotor Material | Titanium |
| Tube Dimensions | 14 x 89 mm |
Summary of safety information for rotor use, including handling hazards and operational safety.
Essential safety checks to perform before operating the rotor.
Steps for loading tubes into buckets, greasing gaskets, and seating buckets.
Ensuring proper balance by symmetrical loading and matching liquid levels.
Procedure for correctly installing the rotor onto the ultracentrifuge drive hub.
Steps for safely removing the rotor and unloading sample buckets.
Formula and explanation for determining the rotor's k factor for run time calculations.
Using the k factor to estimate run times and adjust for different speeds.
Conditions requiring a reduction in maximum run speed.
Guidance on limiting speed and density to prevent CsCl precipitation.
Explanation of curves in Figures 2 and 3 for density and speed relationships.
Guidelines for decontaminating rotors with toxic, radioactive, or pathogenic materials.
To Next Page