ASSEMBLING
1. Open the folding lock to open the stroller,as pic 1, Lift up the handle to
open frame until joints locked, as pic 1-1.
Fold the canopy and then press the brake to stop stroller, push second
lock and press
folding button to fold stroller. As Pic-1-2, 1-3, 1-4.
2. Place the front wheel into the housing until it locked, as pic 2-1/2, Front
wheel can fix the direction,as pic 2-3/4.
3. Insert rear wheels into axle and use the metal pins to release it see
pic-3-1,
4. Press the adjustable button and adjust the footrest as shown in pic 4-1/2.
5. Use the safety belt as pic 5-1/2/3, once the buckles have been snapped
in, waist straps can be adjusted to desired length.
6. Adjust the back rest belt as Pic 6-1/2/3, press the adjusting button to slip
down or up to adjust backrest.
7. Insert the canopy match with side joint as shown in pic 7-1, drop the rear
Vcanopy match with the seat as shown in pic 7-2, open the canopy as
pic 7-3.
8. Insert the dinning tray in holes on sides of plastic joints until it locked as
pic 8-1, release the front bar, press the button on both side as pic 8-2.
9. Fix the cup holder on plastic bean of tube.
Detach the soft parts
10. Release the snap on side wing as shown in pic 10-1, then take off the
hook above on side wing as shown in pic 10-2. then detack the buckle
under footrest as shown in pic 10-3, finally tear down the velcro under
seat part as shown in pic 10-4, to take off the soft parts.
11. To detach the basket, release the snap under footplate and backside
as shown in pic 11-1/2, release the snap and take off the hook on on
both side of tube as shown in pic 11-3, then can detach the basket.
8
UK
To Next Page
Loading...
