6
UK
4.To assemble front bumper
Open the seat cover (see F4). Insert the front bumper peg in the
matching seat adaptor hole, with the front bumper facing sideways
(see F5). Then rotate the bumper 90 degrees and press until it is
locked into position facing forwards (see F6).
5.To disassemble front bumper
Move the button under the seat 90 degrees (see F7), while you lift the
front bumper (see F8). Close the seat cover (see F9).
F4 F5 F6
F7 F8 F9
To Next Page
Loading...
