UK UK
6 7
Click
1. Adjust the length of the safety belt guide hook. The shoulder belt of the car safety
belt must pass through the guide hook and the top of the armrest, and the waist belt
must pass through the guide groove.
2. Let the child sit in the car seat and adjust the length of the safety belt guide hook
according to the child’s height.
3. Pull out the car three-point safety belt, the shoulder belt of the safety belt passes
through the guide hook and the top of the armrest, the abdominal belt of the safety
beltpassesthroughtheguidegroovesonbothsidesofthecarseat,andisxedto
thecarbuckle,andyouhear“Click”soundtoensurethatthebuckleisrmlylocked.
4. Recycle and tighten the car seat belt and adjust the tightness of the car seat belt
according to the size of the child, and it must not be turned over or twisted. Please
make sure that the position of the seat belt waistband is as low as possible, so that
thechild’spelviscanbebetterxed.
BUCKLE UP WITH ISOFIX + 3-POINT SAFETY BELT
Click
1. Ensure that the ISOFIX connector of the car seat is retracted into the base and
place the car seat on both sides of the rear row.
2. Let the child sit on the car seat and adjust the length of the safety belt guide hook
according to the child’s height.
3. Pull out the car three-point safety belt, the shoulder belt of the safety belt passes
through the guide hook and the top of the armrest, the abdominal belt of the safety
beltpassesthroughtheguidegroovesonbothsidesofthecarseat,andisxedto
thecarbuckle,andyouhear“Click”soundtoensurethatthebuckleisrmlylocked.
4. Recycle and tighten the car seat belt and adjust the tightness of the car seat belt
according to the size of the child, and it must not be turned over or twisted. Please
make sure that the position of the seat belt waistband is as low as possible, so that
thechild’spelviscanbebetterxed.
Applicable to vehicles equipped with ISOFIX system that meets the requirements of
ECE R14.
INSTALLATION 3-POINT SAFETY BELT