3
The safety barrier should be checked regularly to ensure that it is secure
and functioning in accordance with these instructions.
If the safety barrier is used at the bottom of the stairs, it should be
positioned at the front of the lowest tread possible.
If the safety gate is used at the top of the stairs, it should not be
positioned below the top level.
Ensure the gate is attached between two clean and solid surfaces.
Additional or replacement parts should only be obtained from the
manufacturer or distributor.
If wall plugs are provided with the gate, and the gate do not secure to the
wall satisfactorily, consult with a hardware store to ensure proper wall
plug application.
This safety barrier conforms to EN 1930:2011, EN 71-2 and EN 71-3.
Disclaimer
Any safety gate which has been subjected to misuse, abuse, abnormal
use, excessive wear and tear, improper assembly, negligence,
environmental exposure, alteration, or accident, or has had its serial
number altered or removed invalidates all claims against the
manufacturer. Any damage to property during installation of your safety
gate is the sole responsibility of the end user.
To Clean: Use mild soap and wipe with a damp cloth.
To Next Page
Loading...
