8
ENGLISH
LIGHT INDICATOR STATUS
Red light is on Charging
No light Powered off/Fully charged
Fast red and blue light blink alternately Pairing mode
Blinks twice every 4 seconds Standby mode (connected)
Blinks every 4 seconds Standby mode (not connected)
Blinks twice every 2 seconds Playing music
Blinks twice every second Incoming call
Blinks every 2 seconds In call
TONE NOTIFICATION STATUS OF HEADPHONE
2 tones every 15 seconds Out of range
5 tones every 20 seconds Low power
Fast red and blue light blink alternately Pairing mode
3.6. Connecting 2 devices to the same Headphone
You can connect two devices at the same time to enjoy hands-free communication and
music streaming, only if they are using different profiles (one is using HFP, the other
AD2P). When one profile is being used by one device, it cannot be used by another.
By default, the Headphone is not preset with the multipoint feature. To enable it or
disable this feature, make sure the Headphones is off and press simultaneously Power
button and << key for about 5 sec to enable it or Power button and >> key to disable it,
for about 5 sec until the LED blinks twice in pink color (blue and red together).
After having paired the Headphone with your mobile phone, you can pair it with your
music player or PC. The music player will use audio streaming profiles (A2DP and
AVRCP), so you can use music playback and remote control features and the phone will
use the hands-free profiles so you can use the phone features.
3.7. Light and sound indicators
Note: the blue indicator will turn red in case of low power.
To Next Page
Loading...
