EasyManua.ls Logo

BeeWi Mobile Wireless Gateway Router - LAN Network Settings; Wireless Network Management

BeeWi Mobile Wireless Gateway Router
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Dial Number
User Name
Password
APN
The dial number provided by the ISP.
User name provided by the ISP.
Password provided by the ISP.
The Access Point Name provided by ISP.
DNS
SIM PIN PIN codes of the SIM card.
The IP address of the Domain Name
System, you may leave it blank since the
value will be caught from the ISP.
Click on Save/Reboot to make the new setup effective and wait until the
router has been rebooted before testing the connection.
3.1.2 LAN Setup
Configure the Router IP Address and Subnet Mask for LAN interface.
Click on Save/Reboot to make the new setup effective.
3.2 Wireless
3.2.1 Basic
This page allows you to enable or disable the wireless network, hide
network from active scans, set SSID wireless network name and restrict
channel set based on country requirements.
3.2.2 Security
This page allows you to configure security features of the wireless
LAN interface. You can set network authentication method, select data
encryption type WEP, WPA or WPA2, specify whether a network key is
required to authenticate to this wireless network and specify encryption
level.