TABLE 2 - RSD & RRB ROTARY CUTTERS - TECHNICAL FEATURES
w/shear pin
w/shear pin
w/slip clutch
4”x8”x15”1”-9 1/4”2 - 1/2”x3”14232794
square
round
round
590
602
613
80”72”20-60
RSD-172
RRB-172
RRB-272
w/shear pin
w/shear pin
w/slip clutch
4”x8”x15”1”-9 1/4”2 - 1/2”x3”11948794
square
round
round
504
517
528
68”60”20-60
RSD-160
RRB-160
RRB-260
w/shear pin
w/shear pin
w/slip clutch
4”x8”x15”1”-9 1/4”2 - 3/8”x2 3/4”125601042
square
round
round
438
440
451
56”48”20-60
RSD-148
RRB-148
RRB-248
w/shear pin4”x8”x15”1”-9 1/4”2 - 3/8”x2 3/4”114371042square36950”42”20-60RSD-142
Driveline
1
3
/
8
” ASAE
Cat. 4
Laminated
wheel size
Cutting
height
# of blades &
size
Blades
tip speed
ft/min
Rotor
rpm/min
DeckWeight
lb.
Overall
width
Working
width
HPModel
Series RSD & RRB, for tractors up to 60 HP, PTO 540 rpm, 3 point hitch cat. 1
TABLE 3 - OPTIONAL EQUIPMENT
*Because of possible injury from thrown objects, all rotary cutters are potentially dangerous. Any rotary cutter intended for use
along roadways or other locations where people may be present must be used with safety shielding in place.
Safety shield front and rear (for RRB-172 & 272)T01-350
Safety shield front and rear (for RSD-172)T01-300
Safety shield front and rear (for RRB-160 & 260)T01-250
Safety shield front and rear (for RSD-160)T01-200
Safety shield front and rear (for RRB-148 & 248)T01-150
Safety shield front and rear (for RSD-148)T01-100
Safety shield front and rear (for RSD-142)T01-400
DescriptionModel
Optional Equipment*
MAINTENANCE 31 BEFCO
T
ORNADO RSD & RRB OPERATOR’S MANUAL
To Next Page
Loading...