Bego Gelovit 200 - Function Buttons; Button Operations and Functions

English ⋅ Gelovit 200
27
85980 BA-en/05 334.00171…
en
Function buttons
* Prerequisite: Temperature of duplicating material must be above T3.
Button
Press, briefly (= ) Press, long (= )
Melting, then automatic cooling to T2 Set T1
Cooling / heating to T2 * Set T2
Cooling to T3 * Set T3
+ 1 (for settings)
Hold down both buttons simultaneously to
reset the counter for melting operations
(actual number) to zero (RESET)
-1 (for settings)
Display number of melting operations
(Example 01:08)
(01 = Actual number = melting operations so
far)
(08 = Max. number = maximum recom-
mended melting operations)
Set max. number
Switch timer on/off Setting the timer