Bego Nautilus T Translation Of The Original Instructions

38
86066 BA-en/00 357.00001.../ 358.00001...
English ⋅ Nautilus
®
CC plus ⋅ Nautilus
®
T
en
16. Observe the melt.
17. If the timer has expired and the melt appears
ready for casting after visual inspection, press
the "Cast" key to start the casting.
The casting is carried out with overpressure.
NOTE
When the last solid part has completely sunk into
the melting bath, start the timer!
Important: The movement of the melt is caused
by the magnetic field, not by the heat. The moving
melt is, therefore, not a boiling melt!
WARNING
Burn hazard!
Use mould tongs!

Bego Nautilus T Specifications

General

Brand	Bego
Model	Nautilus T
Category	Dental equipment
Language	English