10. INPUT - Use this jack to route audio !
$ signals into the module via cables!
$ with 3.5 mm connectors. You can!
$ also route in a keyboard gate signal!
$ to “ring” the filter and produce a!
$ unique percussive sound when you!
$ press a key.!
11. F CV 1 - Use this jack to route!
$ external control voltage or !
$ modulation signals for the filter!
$ frequency setting into the module!
$ via cables with 3.5 mm connectors.!
12. F CV 2 - Use this jack to route!
$ external control voltage or !
$ modulation signals for the filter!
$ frequency setting into the module!
$ via cables with 3.5 mm connectors.!
13. Q CV - Use this jack to route!
$ external control voltage signals for!
$ the RESONANCE (Q) setting into the!
$ module via cables with 3.5 mm!
$ connectors.!
14. LP - This jack sends out the signal!
$ from the low-pass filter via cables !
$ with 3.5 mm connectors.!
15. HP - This jack sends out the signal!
$ from the high-pass filter via cables !
$ with 3.5 mm connectors.!
16. NOTCH - This jack sends out the!
$ signal from the low-pass filter via!
$ cables with 3.5 mm connectors.!
17. BP - This jack sends out the signal!
$ from the notch filter via cables with!
$ 3.5 mm connectors.
To Next Page
Loading...
