page 2 of 4
Loudspeaker Systems
EUROLIVE
B205D
Remove the 4 crosshead screws and pull out the
power supply/ampli er assembly. Disconnect
the wiring and place the assembly on your
work bench.
Remove the 7 crosshead screws from the rear of
the cabinet as shown, and separate the front and
rear sections of the cabinet. Take care as they
are connected with cables, and be careful with
the gasket.
Remove the 4 nuts and bolts and pull out the mic
stand holder from the bottom of the rear cabinet.
Disconnect the power cord and all other
connections to the unit under repair.
Follow all steps in the order in which they
are presented.
Procedure
Risk of electrical shock due to high voltage
discharge, even when the unit is o .
Ensure that the power supply capacitors are fully
discharged before proceeding.
To Next Page
Loading...
