5. Turn on your speaker(s) by pressing the POWER SWITCH. The POWER LED will light up.
6. Turn the MAIN LEVEL knob up to around 50% on each speaker. (If using multiple speakers, the MAIN The LEVEL knob must be
adjusted separately on each speaker.
7. Play your audio source or speak into your microphone at a normal to loud level.
8. Adjust each channel LEVEL knob to the desired volume level. If the signal distorts, turn the channel LEVEL knob back down.
9. If necessary, adjust the HIGH, MID, and LOW EQ knobs on each speaker to boost or cut treble, mid, and bass frequencies to your
taste.
10. Make final overall volume adjustments using the MAIN LEVEL knob.
Specifications
To Next Page
Loading...
