Behringer Eurolive F1220A - 4. Audio Connectors; Balanced 1;4 TRS Connector; Balanced XLR Connectors; 5. Specifications

EUROLIVE F1220A
Specications8
Audio connectors4.
Both audio inputs of the BEHRINGER F1220A and the LINK
OUTPUT connector are fully balanced. To maximize interference
compensation, try to establish balanced connections to other
equipment, whenever possible.
¼" TRS connectorFig. 4.1:
XLR connectorsFig. 4.2:
Make sure that only competent people install your +
F1220A. They must be sufciently earthed during and
after the installation process. Otherwise, electrostatic
discharges may negatively affect the operating charac-
teristics of your equipment.
Specications5.
Output power
RMS @ 1% THD 90 W / 8 Ω
Peak power 125 W / 8 Ω
Input
XLR connector (servo-balanced)
Sensitivity -50 dBu to +10 dBu
Input impedance 11 kΩ balanced; 30 kΩ unbalanced
¼" TRS jack (servo-balanced)
Sensitivity -50 dBu to +10 dBu
Input impedance 11 kΩ balanced; 30 kΩ unbalanced
Link output
XLR connector
Loudspeaker system data
Frequency response 60 Hz to 18 kHz (-10 dB)
Maximum sound pressure level 121 dB @ 1 m
Limiter optical
Equalizer
LOW 80 Hz / ±15 dB
MID 2.5 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
Feedback lter
Filter frequency 300 Hz to 6 kHz
Level reduction max. 15 dB
Power supply
Power consumption max. 180 W
Mains voltage / Fuse
100 - 120 V~ (50/60 Hz) T 2.5 A H 250 V
220 - 230 V~ (50/60 Hz) T 1.25 A H 250 V
Mains connector standard IEC receptacle
Physical/weight
Dimensions (H x W x D) approx. 14.2" x 22.8" x 16"
(approx. 360 mm x 580 mm x 406 mm)
Weight approx. 39.7 lb. (approx. 18 kg)
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modications may be made from time to time to existing
products without prior notice. Specications and appearance may differ from those
listed or illustrated.