Feedback filter (notch filter)
Feedback may occur at high volume levels or under difficult stage situations. Use the FEEDBACK FILTER function
((5), (6)) to reduce feedback. To learn more about the feedback filter, read section 3.4 “Notch filter.”
(5) This switch turns on the feedback filter.
(6) This control adjusts the center frequency of the feedback filter.
LINK OUTPUT
(7) + (8) The LINK OUTPUT is directly connected to the inputs of the F1320D and carries the input signal with no
processing applied. In this way, you can route the signal to the input of another device (for example, a second
F1320D).
MIC/LINE INPUT
(9) Use this ¼” stereo jack to connect a signal source that has ¼” output.
(10) Use this XLR connector to connect a signal source that has XLR output.
To Next Page
Loading...
