Sidepanel F1320D
(11) Press POWER to turn on your F1320D.
(12) You can replace fuses at the FUSE SWITCH of the F1320D. Always replace fuses with the same type.
(13) The mains connection is established using a cable with an IEC mains connector. This cable is delivered with the
F1320D. To avoid ground-loop hum, loudspeakers and mixing consoles should be connected to the same power
circuit.
Check Out behringer.com for Full Manual
Specifications
Output Power
Low-Frequency Range
RMS @ 1% THD 160 W @ 8 Ω
Peak Power 225 W @ 8 Ω
High-Frequency Range
RMS @ 1% THD 40 W @ 8 Ω
Peak Power 72 W @ 8 Ω
Mic/Line Inputs