Behringer EUROPOWER PMP2000 - Specifications

9 EUROPOWER PMP2000 User Manual
◊ For this application, however, please set the MODE switch (21) to
“MON/MAIN”!
EUROPOWER PMP2000
Keyboard
Stereo channel 7/8
DAT recorder
Vocal
microphones
Electric
guitar
Tape in/out
V-AMP 3
ULTRA-G GI100
Electric bass
Mono
channel 5
Mono
channel 6
Mono
channels
1 - 4
Fig. 5.3: Standard setup (example)
6. Specications
Mono Inputs
Microphone Inputs
Type XLR, electronically balanced,
discreteinput circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0  source resistance -122 dB / 125 dB A-weighted
@ 50  source resistance -122 dB / 125 dB A-weighted
@ 150  source resistance -121 dB / 124 dB A-weighted
Frequency response <10 Hz - 100 kHz (-1 dB),
<10 Hz - >200 kHz (-3 dB)
Gain +33 dB, +8 dB with pad
Max. input level +12 dBu @ +8 dB gain
Impedance approx. 2.2 k balanced /
approx. 1.1 k unbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted
(-11 dBu In @ +33 dB gain)
Distortion (THD + N) 0.001% / 0.0008% A-weighted
Mono Line Inputs
Type ¼" TRS connector, balanced
Impedance approx. 80 k balanced,
approx. 40 k unbalanced
Max. input level 30 dBu
Stereo Line Inputs
Type ¼" TRS connector, unbalanced
Impedance approx. 40 k unbalanced
Max. input level +28 dBu
EQ
Low 60 Hz / ±15 dB
Mid 700 Hz/ ±15 dB
High 6 kHz / ±15 dB
Preamp Outputs Left/Mono & Right
Type ¼" TRS connector, unbalanced
Impedance approx. 1.5 k
Max. output level +21 dBu
Power Amp Inputs
Type ¼" TRS connector, unbalanced
Impedance approx. 47 k
Max. input level +21 dBu