14
2. OPERATION
2.1 Main input channel
Fig. 2.1: Connecting a signal source to a Main input channel
Each mono channel features a balanced Line input on a ¼" jack and a balanced Microphone input on an
XLR connector .
Fig. 2.2: Phantom power switch
The +48 V phantom power required for condenser mics can be activated with the phantom power button
in the Main section. If activated, the LED next to the button lights up.
+ Mute the sound system before you turn on phantom power. Otherwise, power-up thumps
could be played back by the monitor speakers.
Fig. 2.3: Gain control and Lo Cut filter
2. OPERATION
To Next Page
Loading...
