23
E
2.4.7 Headphones section
Fig. 2.16: Headphones section
The headphones jack accepts any commercial studio headphones. With the buttons MON/CTRL ROOM
, AUX 1 and AUX 2 , you can select the source for the headphones signal, while the LEVEL control
determines the volume level.
When the MON/CTRL ROOM button is pressed, the headphones output delivers the signal selected in the
MON/CTRL section. Press one of the two AUX buttons to monitor the Aux Send signal on both sides of your
headphones. To create a stereo headphones mix, just press both AUX buttons. Now the signals from Aux
Sends 1 and 2 are routed to the left and rights side of your headphones respectively.
+ Please note that too high a monitoring level can lead to hearing damage.
2.4.8 Subgroups and Main Mix fader
Fig. 2.17: Subgroups section
In a recording situation, the inputs of a multi-track recorder are fed with signals from the Subgroup outputs
2. OPERATION
To Next Page
Loading...
